Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
20 Craftsman Professional Screwdrivers
Fits (11) slotted screwdrivers,
(6) Phillips screwdrivers,
and (3) torx screwdrivers.
Drawer Size
22-1/4 X 16-1/4 inches
$46.50
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 20 Craftsman Professional screwdrivers:
slotted:
1/8 X 3, 3/16 X 4, 3/16 X 6, 3/16 X 6 cabinet, 1/4 X 2-1/4, 1/4 X 4, 1/4 X 6, 1/4 X 8, 5/16 X 6, 5/16 X 8, 3/8 X 8 (left side)
Phillips:
P0 X 3, P1 X 4, P2 X 2-1/4, P2 X 4, P3 X 6, P4 X 8 (right side)
torx:
T10, T15, T20 (right side)
This organizer only fits the older soft handle Craftsman Professional screwdrivers.
22-1/4 X 16-1/4 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 21-3/4 X 16 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.