Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
4 Craftsman Pliers and 8 Screwdrivers
Fits (4) pliers from set 45411,
and (8) screwdrivers from set 47136.
Drawer Size
22-1/4 X 10-5/8 inches
$35.00
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 4 Craftsman pliers and 8 Craftsman screwdrivers:
6-3/4 inch slip joint pliers (Craftsman 45378)
7 inch diagonal cutter (Craftsman 45076)
8 inch long reach (Craftsman 45085)
9-1/2 inch arc joint pliers (Craftsman 45381)
Slotted screwdrivers: 1/8 X 2, 1/8 X 4, 3/16 X 6, 1/4 X 4
Phillips screwdrivers: p0 X 2-1/2, p1 X 3, p2 X 4, P2 X 6
The tools listed above are available as Craftsman 4-piece pliers set 45411 and Craftsman 8-piece screwdriver set 47136.
22-1/4 X 10-5/8 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 22 X 10-3/8 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.