Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
5 Craftsman Tappet Wrenches, Fits non-USA Wrenches
Fits (5) inch tappet wrenches.
Note: this organizer fits the tappet wrenches from the newer version of the Craftsman 540-piece mechanics tool set (see Craftsman 35540).
Drawer Size
11-1/2 X 16-1/4 inches
$29.30
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 5 Craftsman wrenches:
inch tappet wrenches:
3/8 X 7/16 (Craftsman 47467)
7/16 X 17/32 (Craftsman 04747)
1/2 X 9/16 (Craftsman 47464 or 47474)
5/8 X 11/16 (Craftsman 47468)
3/4 X 7/8 (Craftsman 47465)
This tool organizer was designed to fit the tappet wrenches from version 2 of the Craftsman 540-piece set (see Craftsman 35540). The pockets are sized to fit tools that don't have "USA" markings.
11-1/2 X 16-1/4 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 10-3/4 X 11-3/8 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.