Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
14 Craftsman T-Through Handle Hex Keys with 2 Hex Key Sets
Fits (7) t-through handle inch hex keys,
(13) ball-end inch hex keys,
(7) t-through handle metric hex keys,
and (13) ball-end metric hex keys.
Accommodates all hex keys from inch sets 46383 and 46754, plus metric sets 46384 and 46755.
Drawer Size
22-1/4 X 16-1/4 inches
$46.50
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 40 Craftsman hex keys:
t-through handle inch hex keys: 3/32, 7/64, 1/8, 5/32, 3/16, 7/32, 1/4
ball-end inch hex keys: .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8
t-through handle metric hex keys: 2.5, 3, 4, 5, 6, 8, 10
ball-end metric hex keys: 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10
This tool organizer was designed to fit the t-through handle hex keys from Craftsman sets 46383 and 46384, plus ball-end hex key sets 46754 and 46755.
22-1/4 X 16-1/4 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 21-3/4 X 16 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.