Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
40 Craftsman Hex Keys with 2 Pliers
Fits (11) short inch hex keys,
(9) long inch hex keys,
(11) short metric hex keys,
(9) long metric hex keys,
and (2) pliers.
Note: this organizer fits all the hex keys and pliers from the 413-piece mechanics tool set 33413.
Drawer Size
22-1/4 X 16-1/4 inches
$46.50
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 40 Craftsman hex keys and 2 pliers:
short arm inch hex keys: .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4
long arm inch hex keys: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4
short arm metric hex keys: 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8
long arm metric hex keys: 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6
pliers:
6-3/4" slip-joint 45378
6" long needle nose 45102
This tool organizer was designed to fit the hex keys and pliers from Craftsman 413-piece set 33413.
22-1/4 X 16-1/4 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 21-7/8 X 15-1/2 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.