Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
29 Craftsman Screwdrivers Set #1
Fits (12) slotted screwdrivers,
(9) Phillips screwdrivers,
(6) torx screwdrivers,
(1) pocket screwdriver,
and (1) offset screwdriver.
Accommodates 29 screwdrivers including 28-piece set 31797 plus one extra Phillips screwdriver (41297).
Drawer Size
22-1/4 X 14-1/2 inches
$43.00
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 29 Craftsman screwdrivers:
slotted:
3/32 X 1-1/2, 1/8 X 2, 1/8 X 4, 3/16 X 1-1/2, 3/16 X 4, 3/16 X 6, 3/16 X 8, 3/16 X 9, 1/4 X 1-1/2, 1/4 X 4, 1/4 X 6, 1/4 X 8
Phillips:
P0 X 1-1/2, P0 X 2-1/2, P1 X 1-1/2, P1 X 3, P2 X 1-1/2, P2 X 4, P2 X 6, P2 X 8, P3 X 6
torx:
T10, T15, T20, T25, T27, T30
other:
1/4 X P2 combination offset, pocket screwdriver
This tool organizer was designed to fit the 28-Piece Craftsman screwdriver set 31797, but has an additional pocket for a P3 X 6 Phillips screwdriver (41297).
22-1/4 X 14-1/2 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 22 X 14-1/4 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.