Home |
About |
FAQ |
Shipping Policies |
Extras and Deals |
Custom Options |
Contact Us
Foam Tool Organizer for
3 Craftsman Ratchets with Drive Tools and 8 Screwdrivers, Fits non-USA Ratchets
Overview
3 Craftsman Ratchets with Drive Tools and 8 Screwdrivers, Fits non-USA Ratchets
Fits (3) thin profile ratchets,
(1) spinner handle,
(3) u-joints,
(4) adapters,
(8) extensions,
(4) slotted screwdrivers,
(4) Phillips screwdrivers,
(1) magnetic handle,
and (22) magnetic bits.
Accommodates the ratchets, drive accessories, and screwdrivers from the Craftsman 500-piece mechanics tool set 34500.
Drawer Size
22-1/4 X 16-1/4 inches
$46.50
Details
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 3 Craftsman ratchets and additional tools:
1/2-drive thin-profile ratchet (Craftsman 44996)
3/8-drive thin-profile ratchet (Craftsman 44995)
1/4-drive thin-profile ratchet (Craftsman 44994)
1/4-drive 6-inch spinner handle (Craftsman 43372)
1/2-drive to 3/8 socket adapter (Craftsman 04259)
3/8-drive to 1/2 socket adapter (Craftsman 04258)
3/8-drive to 1/4 socket adapter (Craftsman 04256)
1/4-drive to 3/8 socket adapter (Craftsman 04257)
1/2-drive universal joint (Craftsman 04425)
3/8-drive universal joint (Craftsman 04435)
1/4-drive universal joint (Craftsman 04280)
3-inch extension bar, 1/2-drive (Craftsman 44133)
6-inch extension bar, 1/2-drive (Craftsman 44131)
1-1/2-inch extension bar, 3/8-drive (Craftsman 43537)
3-inch extension bar, 3/8-drive (Craftsman 44264)
6-inch extension bar, 3/8-drive (Craftsman 44261)
1-1/2-inch extension bar, 1/4-drive (Craftsman 43538)
3-inch extension bar, 1/4-drive (Craftsman 43539)
6-inch extension bar, 1/4-drive (Craftsman 43531)
slotted screwdrivers:
1/8 X 4, 3/16 X 4, 1/4 X 1-1/2, 1/4 X 6
Phillips screwdrivers:
P0 X 2-1/2, P1 X 3, P2 X 1-1/2, P2 X 4
This tool organizer was designed to fit the ratchets, drive accessories, and screwdrivers from the Craftsman 500-piece set 34500. The pockets for the ratchets and drive accessories are sized to fit tools that don't have "USA" markings.
Free shipping on all orders within the contiguous 48 US states.
Made in the USA!
note: tools are not included
Drawer Size
This organizer is designed to fit a toolbox drawer with inner dimensions of:
22-1/4 X 16-1/4 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 21-3/4 X 14-3/16 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Drawing
Please verify this organizer fits your tools before placing an order.
- Download the drawing: www.FoamFitTools.com/product/F1M-01438.pdf
- Print the pages of the drawing full size or 100% (not fit).
- Check that the printout is full size by measuring the border with a ruler.
- Assemble the pages and place the printed drawing in your toolbox drawer.
- Place the tools over the printed outlines. Visually check that each tool fits within its outline.
Additional Information
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.
