Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
7 Channellock Pliers with Wright Wire Stripper and Snap Ring Pliers
Fits (7) Channellock pliers, (1) Wright wire stripper, and (1) Wright retaining ring pliers.
May be trimmed to fit a variety of drawer sizes.
Only fits the older bent nose and linesman pliers.
Drawer Size
24 X 18 inches
$52.20
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 9 Channellock and Wright pliers:
long reach (duckbill) pliers, 8 inch (Channellock 718)
cutting (diagonal) pliers, 7 inch (Channellock 437)
slip joint pliers, 7 inch (Channellock 546)
lineman's pliers, 7.25 inch (Channellock 347)
bent nose pliers, 5.75 inch (Channellock 386)
long nose pliers, 8.5 inch (Channellock 318)
tongue and groove plier, 9.5 inch (Channellock 420)
retaining ring pliers (Wright Tool 9H1234)
wire stripper/crimper/cutter (Wright Tool 9471)
This tool organizer insert may be trimmed to fit a variety of drawer sizes. The minimum size is marked on the drawing (see link below).
24 X 18 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 20-7/8 X 13 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.