Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
7 Channellock Pliers with Updated Bent Nose and Linesman plus 2 Wright Pliers
Fits (7) Channellock pliers, (1) Wright wire stripper, and (1) Wright retaining ring pliers.
May be trimmed to fit a variety of drawer sizes.
Fits newer version of bent nose and linesman pliers.
Drawer Size
24 X 18 inches
$52.20
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 9 Channellock and Wright pliers:
long reach (duckbill) pliers, 8 inch (Channellock 718)
cutting (diagonal) pliers, 7 inch (Channellock 437)
slip joint pliers, 7 inch (Channellock 546)
lineman's pliers, 7.5 inch (Channellock 367)
bent nose pliers with cutter, 8 inch (Channellock E388)
long nose pliers, 8.5 inch (Channellock 318)
tongue and groove pliers, 9.5 inch (Channellock 420)
retaining ring pliers (Wright Tool 9H1234)
wire stripper/crimper/cutter (Wright Tool 9471)
This tool organizer insert may be trimmed to fit a variety of drawer sizes. The minimum size is marked on the drawing (see link below).
24 X 18 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 20-7/8 X 13-11/16 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.