Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
84 Craftsman Impact Sockets with 6 Drive Tools and 37 Additional Sockets
Fits (36) 3/8-drive impact sockets, (48) 1/2-drive impact sockets, (5) impact extensions, (1) impact adapter, (6) spark plug sockets, and (31) 1/2-drive sockets.
Accommodates the impact sockets, impact drive tools, spark plug sockets, and extra 12-pt sockets from the Craftsman 903-pc set 21470.
Caution: Recommended for a 3.75 inch or deeper drawer.
Drawer Size
22-1/4 X 16-1/4 inches
$61.50
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 127 Craftsman impact tools and other sockets:
(9) 3/8-drive 6-point impact sizes from 1/4 to 3/4
(9) 3/8-drive 6-point impact deep sizes from 1/4 to 3/4
(12) 1/2-drive 6-point impact sizes from 3/8 to 1-1/16
(12) 1/2-drive 6-point impact deep sizes from 3/8 to 1-1/16
(9) 3/8-drive 6-point impact sizes from 10 to 15, and 17 to 19 mm
(9) 3/8-drive 6-point impact deep sizes from 10 to 15, and 17 to 19 mm
(12) 1/2-drive 6-point impact sizes 12 to 19, 21, 22, 24, and 27 mm
(12) 1/2-drive 6-point impact deep sizes 12 to 19, 21, 22, 24, and 27 mm
3/8 X 3 impact extension 19496
3/8 X 6 impact extension 19497
1/2 X 3 impact extension 19498
1/2 X 6 impact extension 19493
1/2 X 10 impact extension 19499
1/2-drive to 3/8 impact adapter 19494
(3) 3/8-drive spark plug socket sizes 5/8, 3/4, and 13/16
(1) 3/8-drive spark plug socket size 18 mm
(2) 1/2-drive spark plug socket sizes 5/8 and 13/16
(12) 1/2-drive 12-point socket sizes from 3/8 to 1-1/16
(19) 1/2-drive 12-point socket sizes from 9 to 27 mm
This tool organizer was designed to fit the impact sockets, impact drive tools, spark plug sockets, and extra 12-pt sockets from the Craftsman 903-pc set 21470. The pockets are sized to fit tools that don't have "USA" markings.
22-1/4 X 16-1/4 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 21-3/4 X 15-1/2 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.