FoamFit Tools section divider

Foam Tool Organizer for
51 Husky Screwdriver Bits with 12 Nut Driver Bits and 40 Hex Keys

see all organizers for Husky tools

Overview

51 Husky Screwdriver Bits with 12 Nut Driver Bits and 40 Hex Keys

Fits (51) screwdriver bits, (12) nut driver bits, (20) short arm hex keys, (20) long arm hex keys, magnetic handle, 1/4 X 5/16 ratcheting wrench, and 5/16 male hex to 1/4-drive adapter.

Accommodates the screwdriver bits and hex keys from the Husky 432-pc set H432MTS.

Available Drawer Sizes:
12-7/16 X 15-3/4, $29.50
13-1/4 X 15-11/16, $29.50
13-1/2 X 15-7/8, $29.50
13-3/4 X 15-3/4, $29.50



FoamFit Tools section divider

Details

This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 106 Husky bits and tools:

(4) phillips screwdriver bit sizes from #1 to #4
(4) slotted screwdriver bit sizes from 1/8 to 5/16
(5) slotted screwdriver bit sizes from 3 to 6.5mm
(6) hex screwdriver bit sizes from 1/8 to 5/16
(8) hex screwdriver bit sizes from 2.5 to 8 plus 10mm
(4) square screwdriver bit sizes from #0 to #3
(4) pozi screwdriver bit sizes from #1 to #4
(8) torx screwdriver bit sizes from T10 to T45
(8) tamper torx screwdriver bit sizes from T10 to T45
(6) nut driver bit sizes from 1/4 to 1/2
(6) nut driver bit sizes 6 and 8 to 12mm
(10) short arm inch hex keys in holder
(10) short arm metric hex keys in holder
(10) long arm inch hex keys in holder
(10) long arm metric hex keys in holder
magnetic bit driver
1/4 X 5/16 double box-end (ratcheting) wrench
5/16 male hex to 1/4-drive socket adapter

This tool organizer was designed to fit the short arm hex keys, long arm hex keys, screwdriver bits, and nut driver bits from the Husky 432-pc set H432MTS.

Four standard sizes are available. Contact us for pricing if you need a special size custom made.

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.



Made in the USA!

Foam Organizer for 51 Husky Screwdriver Bits, 12 Husky Nut Driver Bits, 40 Husky Hex Keys, and 3 Additional Tools

Note: tools are not included

FoamFit Tools section divider

Drawing

Please verify this organizer fits your tools before placing an order.

tool organizer drawings
foam size black/red
part number
blue/yellow
part number
black/blue
part number
12-7/16 X 15-3/4 inches F-02518-R1 F-02518-R2 F-02518-R3
13-1/4 X 15-11/16 inches F-02519-R1 F-02519-R2 F-02519-R3
13-1/2 X 15-7/8 inches F-02520-R1 F-02520-R2 F-02520-R3
13-3/4 X 15-3/4 inches F-02521-R1 F-02521-R2 F-02521-R3
  1. Download the drawing above that matches your drawer size.
  2. Print the pages of the drawing full size or 100% (not fit).
  3. Check that the printout is full size by measuring the border with a ruler.
  4. Assemble the pages and place the printed drawing in your toolbox drawer.
  5. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider

FoamFit Tools Facebook Site FoamFit Tools YouTube Channel FoamFit Tools Pinterest Site