Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
15 Husky Screwdrivers, Soft Handle Style
Fits (8) slotted screwdrivers and (7) Phillips screwdrivers.
Accommodates the soft handle (dual material) screwdrivers from the 15-pc Husky set 246340150.
Drawer Size
20-3/8 X 15-11/16 inches
$42.70
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 15 Husky screwdrivers:
slotted:
1/8 X 2-1/2, 3/16 X 4, 3/16 X 6, 3/16 X 8, 1/4 X 4, 1/4 X 6, 5/16 X 6, 5/16 X 8
Phillips:
p0 X 1-1/2, p0 X 2-1/2, p1 X 3, p2 X 4, P2 X 6, P2 X 8, P3 X 6
This tool organizer was designed to fit the 5-sided soft handle (dual material) screwdrivers from the 15-pc Husky set 246340150.
20-3/8 X 15-11/16 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 18-3/4 X 14-1/4 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.