Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
11 Husky Flare Nut Wrenches
Fits (5) inch flare nut wrenches, (6) metric flare nut wrenches.
Accommodates the flare nut wrenches from the Husky 1025-pc set H1025MTS
Drawer Size
9-1/2 X 19-3/4 inches
$29.40
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 11 Husky flare nut wrenches:
inch wrenches:
1/4 X 5/16
3/8 X 7/16 (HFNW71638)
1/2 X 9/16 (HFNW91612)
5/8 X 11/16 (HFNW111658)
3/4 X 7/8
metric wrenches:
9 X 11 (HFNW911MM)
10 X 12 (HFNW1012MM)
13 X 14 (HFNW1314MM)
15 X 17
16 X 18
19 X 21
This organizer was designed to fit the flare nut wrenches from the Husky 1025-pc set H1025MTS.
9-1/2 X 19-3/4 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 9 X 19-1/2 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.