Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
6 Husky Torx Drivers and 33 Torx Hex Keys
Fits (33) torx hex keys and (6) torx screwdrivers.
Accommodates the torx hex keys and torx screwdrivers from the Husky 1025-pc set H1025MTS.
Drawer Size
9-1/2 X 19-3/4 inches
$29.40
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 168 small Husky tools:
torx hex keys:
(9) magnetic, tamper proof loose torx (HLAMTXK9PC)
(8) torx folding key set (HFTK8PC)
(8) torx folding tamperproof set (HFTPTK8PC)
(8) torx mini foldout set (HMFHKT8PCN)
torx screwdrivers:
T10 X 3
T15 X 3
T20 X 3
T25 X 4
T27 X 4
T30 X 4
This tool organizer was designed to fit the hex keys from the Husky 1025-pc set H1025MTS.
9-1/2 X 19-3/4 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 9 X 18-1/2 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.