Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
22 Husky Metric combination wrenches
Fits (22) metric combination wrenches
Accommodates the metric combination wrenches from the Husky 815-pc set H815MTS
Drawer Size
31-3/8 X 18-1/2 inches
$74.60
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 22 Husky wrenches:
metric combination wrenches:
5.5 mm (HCW55MM)
7 mm (HCW7MM)
8 mm (HSPW8MM)
9 mm (HSPW9MM)
10 mm (HSPW10MM)
11 mm (HSPW11MM)
12 mm (HSPW12MM)
13 mm (HSPW13MM)
14 mm (HSPW14MM)
15 mm (HSPW15MM)
16 mm (HCW16MM)
17 mm (HSPW17MM)
18 mm (HCW18MM)
19 mm (HSPW19MM)
21 mm (HCW21MM)
22 mm (HCW22MM)
24 mm (HCW24MM)
25 mm (HCW25MM)
27 mm (HCW27MM)
30 mm (HCW30MM)
32 mm (HCW32MM)
This organizer was designed to fit the metric combination wrenches from the Husky 815-pc set H815MTS.
31-3/8 X 18-1/2 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 30-1/2 X 16-15/16 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.