Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
30 Husky Metric Combination and Stubby Wrenches
Fits (22) metric combination wrenches from 5.5 to 32 mm plus (8) stubby wrenches.
Accommodates the metric combination and stubby wrenches from the Husky 1025-pc set H1025MTS.
Drawer Size
31-7/8 X 18-1/2 inches
$75.80
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 30 Husky wrenches:
combination wrenches:
5.5 (HCW55MM)
6 (HCW6MM)
7 (HCW7MM)
8 (HSPW8MM)
9 (HSPW9MM)
10 (HSPW10MM)
11 (HSPW11MM)
12 (HSPW12MM)
13 (HSPW13MM)
14 (HSPW14MM)
15 (HSPW15MM)
16 (HCW16MM)
17 (HSPW17MM)
18 (HCW18MM)
19 (HSPW19MM)
21 (HCW21MM)
22 (HCW22MM)
24 (HCW24MM)
25 (HCW25MM)
27 (HCW27MM)
30 (HCW30MM)
32 (HCW32MM)
stubby wrenches:
9 (HSTW9MM)
10 (HSTW10MM)
11 (HSTW11MM)
12 (HSTW12MM)
13 (HSTW13MM)
14 (HSTW14MM)
15 (HSTW15MM)
18 (HSTW18MM)
This organizer was designed to fit the metric combination and stubby wrenches from the Husky 1025-pc set H1025MTS.
31-7/8 X 18-1/2 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 31 X 17-3/4 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.