FoamFit Tools section divider

Foam Tool Organizer for
176 Wright Sockets with 4 Ratchets and 51 Additional Tools

see all organizers for Wright tools

Overview

176 Wright Sockets with 4 Ratchets and 51 Additional Tools

Fits (85) inch sockets, (91) metric sockets, (4) ratchets, (19) additional drive tools, (10) torx bits, and (22) hex keys.

New!

Drawer Size
38 X 18 inches

$116.40



FoamFit Tools section divider

Details

This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 231 Wright and Eklind tools:

(9) 1/4-drive 6-point sizes from 3/16 to 1/2
(10) 1/4-drive 6-point sizes from 5 to 13, including 5.5 mm
(9) 1/4-drive 6-point deep sizes from 3/16 to 1/2
(9) 1/4-drive 6-point deep sizes from 5 to 13 mm
(9) 3/8-drive 6-point sizes from 3/8 to 7/8
(10) 3/8-drive 6-point sizes from 10 to 19 mm
(9) 3/8-drive 6-point deep sizes from 3/8 to 7/8
(10) 3/8-drive 6-point deep sizes from 10 to 19 mm
(9) 3/8-drive 12-point sizes from 3/8 to 7/8
(10) 3/8-drive 12-point sizes from 10 to 19 mm
(9) 3/8-drive 12-point deep sizes from 3/8 to 7/8
(8) 3/8-drive 12-point deep sizes from 10 to 17 plus 19 mm
(12) 1/2-drive 12-point sizes from 7/16 to 1-1/8
(18) 1/2-drive 12-point sizes from 13 to 30 mm
(10) 1/2-drive 12-point deep sizes from 7/16 to 1
(9) 1/2-drive 12-point deep sizes from 13 to 21 mm
(7) 3/8-drive hex bit socket sizes from 1/8 to 3/8
(7) 3/8-drive hex bit socket sizes from 3 to 10 mm
(1) 3/8-drive spark plug socket, Size 5/8
(1) 3/8-drive spark plug socket, Size 3/16
(10) torx bits from T10 to T50

1/4-drive ratchet (Wright 2492)
1/4-drive spinner handle (Wright 2442)
3/8-drive ratchet (Wright 3490)
3/8-drive long ratchet (Wright 3425)
1/2-drive ratchet (Wright 4490)
1/2-drive flex head, 18 inch (Wright 4435)
extension, 1/4 X 2 (Wright 2402)
extension, 1/4 X 4 (Wright 2404)
extension, 1/4 X 6 (Wright 2406)
extension, 3/8 X 3 (Wright 3403)
extension, 3/8 X 6 (Wright 3405)
extension, 3/8 X 8 (Wright 3408)
extension, 1/2 X 5 (Wright 4405)
extension, 1/2 X 10 (Wright 4410)
1/4-drive universal (Wright 2475)
3/8-drive universal (Wright 3475)
1/2-drive universal (Wright 4475)
adapter, 1/4 to 3/8 (Wright 2453)
adapter, 3/8 to 1/4 (Wright 3452)
adapter, 3/8 to 1/2 (Wright 3454)
adapter, 1/2 to 3/8 (Wright 4453)
1/4-drive to 1/4 hex bit adapter (Wright 9280)
3/8-drive to 5/16 hex bit adapter (Wright 9290)

13-pc inch ball hex key set (Eklind 13213)
9-pc metric ball hex key set (Eklind 13609)

This tool organizer insert may be trimmed to fit a variety of drawer sizes.

free shipping within the contiguous 48 US states

Free shipping on all orders within the contiguous 48 US states.



Made in the USA!

Foam Organizer for 174 Wright Sockets, 24 Drive Tools and 32 Accessories

note: tools are not included

Drawer Size

This organizer is designed to fit a toolbox drawer with inner dimensions of:

38 X 18 inches (inside width by inside depth)

It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 36 X 16 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.

Drawing

Please verify this organizer fits your tools before placing an order.

  1. Download the drawing: www.FoamFitTools.com/product/F-03979-T.pdf
  2. Print the pages of the drawing full size or 100% (not fit).
  3. Check that the printout is full size by measuring the border with a ruler.
  4. Assemble the pages and place the printed drawing in your toolbox drawer.
  5. Place the tools over the printed outlines. Visually check that each tool fits within its outline.

Additional Information

Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.

The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).

Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.

Black and Red, Blue and Yellow, and Black and Blue Tool Foam
FoamFit Tools section divider

FoamFit Tools Facebook Site FoamFit Tools YouTube Channel FoamFit Tools Pinterest Site