Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
16 GearWrench Long Inch Non-Reversible Ratcheting Wrenches
Fits (16) ratcheting wrenches from 7/32 to 1 inch.
Sized to fit the GearWrench 120XP Universal Spline XL wrenches.
Accommodates the wrenches from GearWrench set 86451.
Drawer Size
24 X 18 inches
$52.20
This foam tool organizer is made from closed-cell polyethylene tool foam. It has been precision CNC-cut to fit the following 16 GearWrench wrenches:
inch sizes:
7/32 (GearWrench 86430)
1/4 (GearWrench 86431)
9/32 (GearWrench 86432)
5/16 (GearWrench 86433)
3/8 (GearWrench 86435)
7/16 (GearWrench 86436)
1/2 (GearWrench 86437)
9/16 (GearWrench 86438)
5/8 (GearWrench 86439)
11/16 (GearWrench 86440)
3/4 (GearWrench 86441)
13/16 (GearWrench 86442)
7/8 (GearWrench 86443)
15/16 (GearWrench 86444)
1 (GearWrench 86445)
This tool organizer was designed to fit the longer GearWrench 120XP Universal Spline XL ratcheting combination wrenches. These 16 wrenches are available as GearWrench set 86451.
24 X 18 inches (inside width by inside depth)
It is possible to trim this organizer to fit a smaller drawer. The minimum recommended size is 22 X 15-3/8 inches. Note that trimmed organizers are not returnable. Also, contact customer service to order an organizer trimmed or made with a different sheet size.
Each FoamFit insert is designed for shadowing a specific set of tools. These organizers are made from high-quality tool foam with precision-cut pockets.
The pockets are cut up to 1/2 inch deep in 3/4 inch thick tool foam, or up to 1 inch deep in 1-1/4 inch thick tool foam. Most inserts require less than 2 inches of height to fit in a 2-inch drawer (unless otherwise noted).
Our tool foam is two layers of closed-cell polyethylene foam. The contrasting top layer is thermally bonded to the bottom layer for maximum durability. Three color combinations are available: black with red, blue with yellow, and black with blue. The foam is resistant to most oils and fuels.