Home | About | FAQ | Shipping Policies | Extras and Deals | Custom Options | Contact Us
5 Nupla Hammer Kit #158
This complete kit includes organizer insert
F-03680-R, 5 Nupla Hammers, 1 Mayhew pry bar, and 9 Mayhew punches.
The tool organizer may be trimmed to fit a variety of drawer sizes. See the drawing for the minimum recommended size.
Foam drawer insert made in USA (WI).
Tools made in USA (CA and MA).
This kit includes the following 5 Nupla Hammers, 1 Mayhew pry bar, and 9 Mayhew punches:
12 oz ball pein (Nupla 21-012)
16 oz ball pein (Nupla 21-016)
16 oz soft face hammer (Nupla 11235, CBH-135)
20 oz rip claw hammer (Nupla 19-020)
2 lb dead blow (Nupla Power Drive 10025)
12 inch pry bar, 17 inch overall (Mayhew Dominator 60144)
center punch, 3/8 X 5 inch (Mayhew #415, size 3/8)
line-up punch, 5/32 X 9 (Mayhew 22011, #466, size 5/32)
cold chisel, 1/2 X 6 (Mayhew #70, size 1/2)
pin punch, 1/8 X 4-3/4 (Mayhew #413, size 1/8)
pin punch, 5/32 X 5 (Mayhew #413, size 5/32)
pin punch, 3/16 X 5-1/4 (Mayhew #413, size 3/16)
pin punch, 7/32 X 5-1/2 (Mayhew #413, size 7/32)
pin punch, 1/4 X 5-3/4 (Mayhew #413, size 1/4)
brass drift punch, 1/2 X 7 (Mayhew 25076)
This foam insert included with this kit measures 24 X 18 inches.
We do not recommend compressing the foam because it can make the tools difficult to remove.
If necessary, the foam sheet can be trimmed.
The minimum recommended size is 22 X 14-7/8
inches.
We test fit each tool in the kit.
After testing, the tools are repackaged in a heavy-duty bag by drawer, to keep them together during shipping.
“This hammer kit was based on our original Nupla hammer kit. We switched from a claw hammer to a rip claw hammer. The rip claw hammer is larger and good for prying apart pallets and crates. We also added a small ball pein hammer, more pin punches, and a brass drift. These tools should come in handy working on cars, but would also be great for working on fixtures and machine tooling.”